Recycled filament made of PET – green, 1Kg
249 Kč vč. DPH
Why we make from recyclateThis is a very complex material to print!
Recommended for really experienced printers!
- Diameter: 1,75 mm +/-0,05 mm
- filament made from recycled PET bottles
- rPET material is suitable for experienced printers
- printing-intensive filament
- ecological filament
- suitable for printing large objects
- very good mechanical properties, which include strength, elongation, elasticity and slip
- resists creep (or creep)
- long-term usable up to 100°C
- up to 130°C in the short term
- resists the effects of acids and bases (except strong hydroxides (NaOH, KOH) and nitric acid (HNO3)
- excellent dimensional stability
- material susceptible to moisture absorption
Před první koupí celé cívky rPET filamentu, doporučujeme prvně zakoupit náš Testovací balíček
Popis balení:
Standardní balení – filament zabalený jednotlivě v malých krabičkách.
Ekologické balení – filament zabalený bez malých krabiček po více kusech do jedné velké krabice.e.
on stock
Properties
Diameter: 1,75mm +/- 0,05mm
Make-up: 360m
Net weight: 1100g
Gross weight: 1550g
Coil weight: 248g
Dimension of coil: 20×6,8cm
Benefits
- better mechanical properties than ABS and PLA
- good elasticity and strength
- good grip
- 100% recyclable
- environmentally friendly
Recommended Print Setup
- Teplota extrudéru: 250-270 °C
- Podložka: 70-100 °C
- Před použitím doporučujeme vysušit
- How to print rPET material
We recommend this type of material to experienced printers.
We recommend replacing the original Teflon tube (tubing) with a tube in one piece, which will go through the entire head of the printer in one piece.
This replacement does not create any free intermediate space where the material could be stiffened and the head clogged during filament printing.
For detailed setup of the printer and its possible modification, use our technical support (eshop@ekomb.cz).
Storage
- Store in a dry place and protect from moisture.
- If rPET filament is moistened, we recommend drying in a hot-air oven at 65°C for 4-5 hours.
Nozzle
- Recommended nozzle for printing filament rPET: 0.6mm and more.
Printouts
English 
Czech